1KW 2KW 3KW MAX Umthombo weLaser
I-PARAMETER
| Imodeli | I-MFSC-1000 | I-MFSC-1500 |
| Amandla Okuzisholo | 1000W | 1500W |
| Imodi yokusebenza | CW/ Ishintshiwe | |
| Amandla Amandla | 10 kuya ku-100% | |
| Ubude begagasi | 1080 ± 10 nm | |
| Ukuzinza kwamandla | ±1 % | |
| Ikhwalithi ye-Laser Beam, BPP | ≤ 1.5 mm x mrad (50μm QBH) | |
| I-Modulation Frequency | ≤ 20kHz | |
| Buka kuqala Amandla Okukhanya Okubomvu | 150 μW | |
| Isixhumi esibonakalayo | I-QBH(LOC) | |
| Ububanzi | 50 (25) μm | 50 (35) μm |
| Ukugoba Irediyasi | 200 mm | |
| Faka i-Voltage | 220VAC (-15% kuya +10%) Isigaba esisodwa | |
| Izinga Lokushisa Lokusebenza | +10 ukuze +40 ℃ | |
| Izinga Lokushisa Lesitoreji | -10 ukuze +60 ℃ | |
| Umswakama | 10 kuya ku-85% | |
| Indlela Yokupholisa | Ukupholisa Amanzi | |
| Ukupholisa Okumaphakathi | Amanzi acwebile / I-Glycol Antifreeze | |
| Ubukhulu | 482.6×800×193mm (W×D×H) | |
| Isisindo sengqikithi | 53 ( ±3)kg | 57(±3) kg |
IMINININGWANE
FAQ
1. Ithini imigomo yakho yokukhokha?
100% ngaphambi kokulethwa. Sizokubonisa izithombe zemikhiqizo namaphakheji
ngaphambi kokulethwa.
2. Kuthiwani ngesikhathi sakho sokulethwa?
IMP: Ngokuvamile, kuzothatha izinsuku ezingu-3 ngemva kokuthola inkokhelo yakho yangaphambi kwesikhathi. Isikhathi esithile sokulethwa sincike ezintweni kanye nenani le-oda lakho.
3. Ingabe uyazivivinya zonke izimpahla zakho ngaphambi kokulethwa?
A: Yebo, sinesivivinyo esingu-100% ngaphambi kokulethwa
4. Ulenza kanjani ibhizinisi lethu libe ubude futhi ubuhlobo obuhle?
1. Sigcina ikhwalithi enhle nezintengo ezincintisanayo ukuze siqinisekise ukuthi amakhasimende ethu ayazuza;
2. Sihlonipha wonke amakhasimende njengomngane wethu futhi senza ibhizinisi ngobuqotho futhi senze ubungane nawo,
5. Ingabe unazo ezinye izingxenye eziyisipele zerutha ye-CNC njenge-spindle motor, igripper, i-collet?
Sinazo zonke izinhlobo zezesekeli mayelana nomshini wokuqopha. Futhi singavumela onjiniyela bakusize ukuthi uzihlele.
6. Ngingakwazi ukuvakashela imboni yakho?
Yebo, wamukelekile efekthri yethu.
