I-Sino RC1001 Galvo Scanning Head Set
I-PARAMETER
| Imodeli | I-RC1001 | I-Peak Yamanje | 15A(Ubukhulu) |
| Isivinini | 8000mm/s | I-Engeli ephezulu yokuskena | ±15° |
| Isivinini Sesikhundla | 10000mm/s | Thola Iphutha | ＜8mRad |
| Izinga Lokushisa Lokusebenza | 0-45℃ | Iphutha Lokulandelela | ≤180us |
| Izinga Lokushisa Lokugcina | -10 ℃ ukuya +60 ℃ | Ukuphindaphinda | awu 8m |
| Umugqa | 99.90% | I-Voltage yokufaka | ±15VDC |
| Isikhathi sokusetha | ≤0.4ms | Imbobo yokufaka i-Laser | 10mm |
| I-Scale Drift | <40PPM/℃ | Isisindo | 850g |
| I-Zero Drift | <15μRad./℃ | Usayizi Webhodi Lomshayeli(L*W*H) | 75*46*25mm |
| Ukushayela Isikhathi Eside Ngaphezu Kwamahora angu-8 | <0.5mRad | Usayizi we-Galvo(L*W*H) | 100*95*120mm |
| I-RMS Yamanje | 2.0A | Izinketho ze-Wavelength | 355nm/106um/1064nm |
IMINININGWANE
FAQ
1. Yini ongayithenga kithi?
Sihlinzeka ngazo zonke izinhlobo zezingxenye ze-CNC router, njenge-spindle motor, stepper motor, cnc router drive, i-frequency inverter, uhlelo lokulawula i-cnc, i-rack, ibhokisi legiya, i-drag chain, iphampu yamanzi, isitimela, ibhulokhi, njll.
Futhi hlinzeka ngezingxenye zomshini we-laser we-Co2, njenge-exhaust fan, ishubhu yengilazi ye-laser, ukunikezwa kwamandla komshini we-laser, ilensi, isibuko, i-chiller yamanzi, iphampu yomoya, ikhanda lokusika umshini we-laser, imoto, umshayeli, isilawuli somshini we-laser, ithebula lomshini we-laser, njll.
Futhi ube nezingxenye zomshini we-fiber laser, njengomthombo we-laser wokumaka noma umshini wokusika, ilensi, igalvo, Ikhadi le-JCZ, i-rotary, ithebula le-2D/3D, ukunikezwa kwamandla ka-Meanwell, ikhanda lokusika i-Raytools, njll.
2. Kungani kufanele uthenge kithi hhayi kwabanye abahlinzeki?
I-JINZHAO ingumthengisi wezingxenye eziyisipele eziqeqeshiwe, sinikezela ngazo zonke izingxenye eziyisipele ezisezingeni elihle, ikhwalithi iyafana nalokho esikufaka emshinini wethu, ngakho ikhwalithi iqinisekisiwe.
